Aastra 600d for OpenCom 1000 User Guide (with bookmarks) Manuel d'utilisateur télécharger pdf (Page 11)

Installation

Inserting the standard battery

Aastra 610d, 620d

Push the battery cover downwards until it disengages

from the locking mechanism and lift off. Insert the bat-

tery with the contacts downwards. Replace the battery

cover and push upwards until it snaps into place.

Aastra 630d

Undo the two screws on the back of the handset with a

suitable tool and remove the cover. Insert the battery

with the contacts downwards, close the battery com-

partment with the cover (insert underneath, press

down from above) and screw back in place. Do not

damage the rubber seal when assembling.

Inserting the power battery

You can order a battery with higher capacity

(power battery) for the Aastra 620d and 630d

as an accessory (see page 101).

This battery has a thicker design so you need another

battery cover that protrudes approx. 6 mm beyond the

rear of the device.

Install the new battery cover as described above.

In the Aastra 620d and 630d you should remove any

installed fixing bracket beforehand.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 117 118

Pas de commentaire

Aastra 600d for OpenCom 1000 User Guide (with bookmarks) Manuel d'utilisateur Page 11