Aastra 6700i for Aastra 800 and OpenCom 100 User Guide EN Manuel d'utilisateur télécharger pdf (Page 23)

Using the Aastra 673xi / 675xi

• Unlit ( ): The subscriber is free. Press the BLF function key to call the subscriber.

• Blinking ( ): The subscriber is being called. Press the BLF function key to accept

the call (“Pickup”).

• Lit ( ): The subscriber is busy.

You can also programme a softkey with the BLF function to one of the additional key

levels. In this case, you must activate the level with the

softkey so that the LED

indicator shows the state of the subscriber connected.

Phone Lock

You can lock the Aastra 673xi / 675xi to prevent unauthorised use. Unlocking is pos-

sible only with your user PIN. This function can be executed via a function key or via

the Options menu.

1. Press the Options key .

The Options List menu card appears.

2. Use the navigation keys to select the 3.Phone Lock menu entry. Confirm with

the right arrow key or with the

Select

softkey.

3. Confirm Lock the phone? on the display with the

Lock

softkey.

Phone is locked appears on the display. When in this state, no functions can be

triggered and no calls made. It is possible, however, to accept incoming calls.

You can unlock the phone:

1. Press the Options key .

To unlock the phone and Password: appear on the display.

2. Enter the user PIN using the number keys. Confirm with the right arrow key or

with the

Enter

softkey.

Note

When the Aastra 673xi / 675xi is locked, emergency calls to predefined call numbers

can still be made. The admitted call number depend on the special lists assigned to

the user group (Telephony: Lists: Special lists menu). The default contains the 110

and 112 call numbers.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Pas de commentaire

Aastra 6700i for Aastra 800 and OpenCom 100 User Guide EN Manuel d'utilisateur Page 23