Aastra 6700i for Aastra 800 and OpenCom 100 User Guide EN Manuel d'utilisateur télécharger pdf (Page 26)

Main Menu on the Aastra 673xi / 675xi SIP Telephone

0 Central settings

This is where you can configure central settings for the communications

system. This is an optional menu item, it is only available if your system admin-

istrator has configured the appropriate authorisation for your user group.

Menu description: see page 29

1Calls

1 Call lists: Displays the lists of missed and accepted calls.

1Missed calls: You see the call numbers of the callers who most recently tried

to reach you.

2 Accepted calls: You see the call numbers or the names of the callers with

whom you last spoke.

3Voicebox mess. (voicebox messages): You see the list of received voicebox

messages and can listen to them and edit them.

4 Hunt group: If your telephone belongs to one or multiple hunt group(s), use this

menu entry to switch hunt call signalling for your telephone on or off.

HG No.: [internal call number]: The pick-list of hunt group call numbers

appears. Activated hunt group calls have a “+” prefixing the hunt group

call number; deactivated ones have a “-”.

On/Off: switching hunt group calls on or off

All: switching all hunt group calls On/Off for your telephone

Note: If you are the last reachable member of the hunt group and you log out

then any further callers will hear a busy signal. Depending on the system con-

figuration additional calls can also be directed to the exchange.

2Call Forwarding

1 Call diversion: Programming call diversions for your own telephone. The display

shows a separate line with Immediately, After delay or Busy for each type of

call forwarding along with the current status (“+” = on, “-” = off).

6 Follow Me: This type of call forwarding diverts calls from another terminal (source)

to your telephone. The PIN of the source terminal is required for this function. If

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Pas de commentaire

Aastra 6700i for Aastra 800 and OpenCom 100 User Guide EN Manuel d'utilisateur Page 26