Aastra IP Phone Guide de l'utilisateur télécharger pdf (Page 33)

IP PHONE FOR MX-ONE™

33 6/1553-DBC 444 01 Uen A1 2010-06-10

5.1.2 Logging On To the System

When the phone is logged on to the network, you can either use the

phone directly, or you need to log on to the telephony system, see below.

• The phone logs on automatically to the telephony system, and the

phone is ready to use. You cannot log on or log off. This mode can

be used for phones in, for example, receptions.

• The phone has to be logged on manually to the telephony system

before you can use it. You are either required to enter the extension

number, or the extension number and a password (or PIN code).

Note: The PIN code can be changed by the user (see 18.8.1

Changing PIN Code on page 109), whereas the password has to

be set by the system administrator.

The phone does not work during power failure. After a power failure the

phone automatically restarts. When the phone is starting up (rebooting),

any PC that is connected to the phone will loose its network connection

for about 10 seconds.

5.1.3 Free User

When log off is allowed, the phone must be logged on (registered) to the

telephony system before you can use it. When the phone is logged off,

the display will look like in figure 14 on page 33. If the emergency call

function is enabled, it is possible to make emergency calls. For more

information on emergency calls, see 8.3 Emergency Calls (SOS Calls)

on page 52.

Figure 14:Logon screen when log off is allowed

The last extension number used (by the previous user) remains until

changed.

To log on with your own extension number, do the following:

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 124 125

Pas de commentaire

Aastra IP Phone Guide de l'utilisateur Page 33